G-Tec Dust Free Grinding, Sanding, Polishing, Diamond Disks

PWM Distribution - Specialist Tools for Construction and Utility Contractors

February 2012

... click here for details of new Metal Cutting and Spark Control safety guard for angle grinders ...


G-Tec Grinding and Sanding Cowls

Consistent and effective Dust Control for Concrete Grinding & Sanding · For 125, 180 and 230 mm grinders (plus selected 115 mm models) · Accepts 125 & 180 mm diamond disks (30mm offset) · Options for other disks & backing pad · Aluminium clamping boss matched precisely to grinder make/model · Replaceable polyurethane shroud permits low-cost refurbishment · 50 mm dust port with parallel hose outlet ensures efficient dust collection

TV50 Dust Extractors are recommended for use with all G-Tec grinding cowls to ensure Dust Free working.

Buy On Line from this page

		G-Tec grinding cowls attach to the angle grinder using an aluminium clamp, machined to be an exact fit for specific models. This is very important as the rubbing action of the polyurethane shroud on rough or uneven surfaces could easily unseat a poorly attached cowl. The moulded polyurethane shroud is flexible in construction, thereby accomodating reducing height of the grinding disk (through wear) and the uneven nature of many surfaces. Moreover, when the shroud has worn away, the aluminium clamping boss can be unscrewed and a replacement shroud can be fitted.

		G-Tec cowls are supplied with custom flange nuts which position a standard format diamond grinding disk optimally within the shroud. These flange nuts are supplied in appropriate sizes for both 125 and 180 mm grinders. By exception, Hitachi 180 mm cowls are configured to use the manufacturer supplied flange nuts and hence are a less expensive item.

		The standard flange spanner as supplied by most manufacturers is of flat construction and usually features only two locating pegs. It generally offers very little security and is usually unable to reach into the dish on recessed disks The 4 pin Tuff Key flange spanner corrects all of these shortcomings and is a good insurance against damage to hands on the sharp edges and surfaces of grinding disks.

		All G-Tec cowls are supplied with a detachable polyurethane hose cuff. This cuff permits use of either 50 or 38 mm diameter vacuum hose. It ensures maximum vacuum effect is retained by sealing closely with the shroud. It also stops the hose end fraying or losing shape and permits its easy removal and replacement. The G-Tec hose outlet is parallel to the grinding surface and in line with the natural draft created by the rotating disk, thereby maximising the dust extraction potential

		G-Tec cowls are available for a limited number of 115 mm grinders, as are the appropriate diamond grinding disks. Lesser power grinders may not be suitable for aggressive tasks such as grinding concrete surfaces, so we would advise caution when considering the use of a 115 mm grinder for such work.

		A range of Grinding and Sanding Consumables is available in both 125 and 180 mm sizes. These include: Diamond disks for concrete and coatings removal Polycrystalline diamond (PCD) disks for screed and glue removal ZEC rigid Silicon Carbide disks for cleaning and abrading surfaces

On Line Purchases

Click Here for our Terms & Conditions of Sale
All prices quoted exclude VAT and Carriage. Click here for delivery charges
Standard delivery indicates the goods should be despatched within 2 workings days
Extended delivery indicates the goods should be despatched within 5 working days
On Line purchases will be delivered to the address on the credit/debit card used for payment
Need more than one of an item? Click Add To Basket once, then on the Checkout page, change Quantity (and Recalculate)


125 mm G-Tec Grinding/Sanding System	£147.00	Add to Basket
125 mm G-Tec cowl, fitted to Hitachi G13 SE (110 volt/1050 watt) angle grinder (no disk).	Standard delivery
G-Tec-125-HIT-110	Standard delivery

125 mm G-Tec Grinding Cowl	£48.00
Dust Control Grinding Cowl for selected 115 & 125 mm angle grinders. Select model from list below	Standard delivery
Hitachi G13 Se	G-Tec-125-HIT-001	Add to Basket
Bosch GWS8-115 (115 mm grinder)	G-Tec-125-BOS-001	Add to Basket
Bosch GWS10-125; GWS11-125	G-Tec-125-BOS-002	Add to Basket
Makita 9554NB (115 mm grinder)	G-Tec-125-MAK-001	Add to Basket
Makita 9015B; 9528; 9555NB	G-Tec-125-MAK-002	Add to Basket
Makita 9558PB; 9562CVH; 9565H	G-Tec-125-MAK-003	Add to Basket

125 mm G-Tec Replacement Shroud	£21.00	Add to Basket
fit this item to your existing clamping boss and hose cuff to create an ‘as new’ G-Tec Grinding Cowl
G-Tec-125-Shroud

180 mm G-Tec Grinding/Sanding System	£158.00	Add to Basket
180 mm G-Tec cowl, fitted to Hitachi G18 SE2 (110 volt/2300 watt) angle grinder (no disk).	Standard delivery
G-Tec-180-HIT-110

180 mm G-Tec Grinding Cowl - HITACHI only	£42.00	Add to Basket
Dust Control Grinding Cowl for Hitachi G18 SE2; Hitachi G23 SC2 G-Tec-180-HIT-001	Standard delivery


180 mm G-Tec Grinding Cowl	£52.00
Dust Control Grinding Cowl for various 180 & 230 mm angle grinders. Select model from list below:	Standard delivery

Bosch 20/180; 20/230	G-Tec-180-BOS-001	Add to Basket
Makita 9029; 9047; 9049	G-Tec-180-MAK-001	Add to Basket
Makita 9067; 9069; GA9020	G-Tec-180-MAK-002	Add to Basket

180 mm G-Tec Replacement Shroud	£ 22.00	Add to Basket
fit this item to your existing clamping boss and hose cuff to create an ‘as new’ G-Tec Grinding Cowl
G-Tec-180-Shroud

Tuff Key custom flange nut spanner (Suitable for all G-Tec and C-Tec systems)	£ 16.75	Add to Basket
TUFF-KEY	Standard delivery

125 mm (5”) Turbo Diamond Grinding Disk 15 segment	£ 52.80	Add to Basket
125 mm (5”) Turbo Diamond Grinding Disk 15 segment	Standard delivery
D-G-Disk-125

180 mm (7”) Turbo Diamond Grinding Disk 23 segment (10 mm depth)	£ 64.90	Add to Basket
	Standard delivery
D-G-Disk-180

125 mm ZEC Silicon Carbide rigid sanding disk Select grade below	£ 5.95
	Standard delivery
16 grit	ZEC-125-16G	Add to Basket
30 grit	ZEC-125-30G	Add to Basket
60 grit	ZEC-125-60G	Add to Basket

180 mm ZEC Silicon Carbide rigid sanding disk Select grade below	£ 6.95
	Standard delivery
16 grit	ZEC-180-16G	Add to Basket
30 grit	ZEC-180-30G	Add to Basket
60 grit	ZEC-180-60G	Add to Basket


	Surface Preparation Planing/Scabbling Diamond Grinding Shotblasting Floor Strippers Power Tools Mixing Systems Application Consumables


	Dust Control C-Tec Cutting Dust Muzzle Tornado Arbortech AllSaw Wall Chaser G-Tec Grinding G-Tec AllFit Hurricane Dust Extractors


	Brickwork Brick Raking Pointing Gun Pointing Irons Plunge Cutting


	Manhole Lifter Lifting Trolley MagTec KeyTec VacTec ChainTec Video Gallery Photo Gallery Buy Online


	Specialist Tools Gully Opener Snap & Twister Paving Jointer Kerb Lifter ‘Belly’ Pipe Saw Core Drilling Specials


	PWM Distribution is a trading name of Awbridge Business Consulting Ltd. Registered in England and Wales No. 3472920 VAT No. 704 5139 58