Sample Equipment Configurations

Please call to discuss specific requirements, as the available configurations & combinations are too numerous to list.

All Prices exclude Carriage & VAT

C-Tec 5” Dust Cowl, featuring depth-adjustable stainless steel skid and 32 mm extraction port. Fitted with clamping boss sized to specific make/model of angle grinder, to ensure safe and secure attachment. Significantly Dust Free operation when used with a suitable Dust Extractor. Kit includes custom flange nuts to ensure raking blade is centred in skid opening

£69

C-Tec 5” Dust Cowl as described directly above, fitted to an Hitachi 5” (125 mm) 1020 watt grinder - choose 110 or 240 volt grinder. Blade NOT included

£159

C-Tec 5” Dust Cowl and Hitachi Grinder combination, as described directly above, fitted with 5” x 1/4” (125 x 6.3 mm) Professional Diamond Raking Blade

£233

TV50e Cyclonic Dust Extractor fitted with BIA Category C cartridge filter and equipped with ‘Reverse Air Pulse’ integral filter cleaner. Hand portable, weighing less than 18 kg. Supplied with 5 metre x 38 mm nylon reinforced hose and 10 polythene waste bags. 1400 watt motor; available as 110 or 240 volt. Ideally suited to High Intensity Dust Removal as found when Brick Raking & Chasing

£359

Quikpoint drill attachment, for consistent penetration and fast filling of raked joints. Will fit a variety of battery or mains powered drills. Best suited to the compact 3/8” (10 mm) drill. Acceleration trigger highly desirable (on the drill) for controlled delivery of the mortar. Includes 5 nozzle sizes/shapes - see Quikpoint Nozzles page for details

£189

Quikpoint attachment, as described immediately above, complete with Makita 3/8” variable speed drill. Choice of 110 or 240 volt operation.

£299

Pointmaster wheeled tool plus a choice of two finishing profiles - Recessed, Weatherstruck or Bucket Handle

£29.99

Sample Equipment Combinations

£425

TV50e dust extractor with 5 metre x 38 mm nylon reinforced hose and 10 waste bags

C-Tec 5” Dust Cowl  NO angle grinder, NO diamond blade

Custom flange nut set for centring blade in dust cowl

£575

TV50e dust extractor with 5 metre x 38 mm nylon reinforced hose and 10 waste bags

C-Tec 5” Dust Cowl with Hitachi 5” 1020 watt grinder and 1/4” (7mm) diamond raking blade

Raking flange nut set plus Tuff Key custom flange spanner